Difference between revisions of "Category:Radio Stations"

From TMB Wiki
Jump to: navigation, search
m
Line 16: Line 16:
  
 
* Analogue radio broadcasts (FM frequencies, cable, satellite) [RAW - format]
 
* Analogue radio broadcasts (FM frequencies, cable, satellite) [RAW - format]
* Digital radio broadcasts (DAB, Freeview, DVB-S, DVB-T, DVB-C) [[[MP2]] -format]
+
* Digital radio broadcasts (DAB, Freeview, DVB-S, DVB-T, DVB-C) [ [[MP2]] -format]
* Digital internet broadcasts (stream, podcast) [[[MP3]], [[AAC|AAC+]], [[WMA]], [[RA]], [[OGG]] -formats]
+
* Digital internet broadcasts (stream, podcast) [ [[MP3]], [[AAC|AAC+]], [[WMA]], [[RA]], [[Ogg Vorbis|OGG]] -formats]
  
 
One can now safely deduce a quality order among all the different formats. Topmost given is the format with the highest quality, the entry at the bottom of the listing is a strict No-No if you have a choice.
 
One can now safely deduce a quality order among all the different formats. Topmost given is the format with the highest quality, the entry at the bottom of the listing is a strict No-No if you have a choice.
Line 39: Line 39:
 
** <112kbps: low bitrates, usually with lots of "crispy" distortions at higher frequencies
 
** <112kbps: low bitrates, usually with lots of "crispy" distortions at higher frequencies
  
*Bitrate (for the more advanced formats [[AAC|AAC+]] and [[OGG]]):
+
*Bitrate (for the more advanced formats [[AAC|AAC+]] and [[Ogg Vorbis|OGG]]):
 
** >160kbps: transparent
 
** >160kbps: transparent
 
** 96-160kbps: near-transparent
 
** 96-160kbps: near-transparent
Line 48: Line 48:
  
  
The project quickly became a team effort. Mike Cheng eventually left leadership and started working on [http://toolame.sourceforge.net/ tooLAME], an [[MP2]] encoder. Mark Taylor became leader and released version 3.0 featuring gpsycho, a new psychoacoustic model developed by him.
 
 
Nowadays LAME is considered the best MP3 encoder at mid-high bitrates and features the best VBR model among MP3 implementations, mostly thanks to the dedicated work of talented developers like Takehiro Tominaga, Naoki Shibata, Darin Morrison, Gabriel Bouvigne, Robert Hegemann, etc. And development is still going on...
 
 
==VBR (Variable bitrate) settings==
 
'''[[VBR]]:''' ''variable bitrate mode. Use variable bitrate modes when the goal is to achieve a fixed level of quality using the lowest possible bitrate.''
 
 
[[VBR]] is best used to target a specific quality level, instead of a specific bitrate. The final file size of a VBR encode is less predictable than with [[ABR]], but the quality is usually better.
 
  
 
-V(number) where number is 0-9, 0 being highest quality, 9 being the lowest.
 
-V(number) where number is 0-9, 0 being highest quality, 9 being the lowest.
Line 105: Line 97:
 
| -V 9 || || 65 || 45...85
 
| -V 9 || || 65 || 45...85
 
|}
 
|}
 
If you need a predictable bitrate (in a streaming application, for example), use ABR or CBR modes, described below.
 
 
[[Category:Audio Tools]]
 
 
 
 
 
 
  
  
  
 
[[Category:Top Level]]
 
[[Category:Top Level]]

Revision as of 17:30, 17 April 2006

       -      -         -    WORK IN INTENSE PROGRESS (Ojay)


EDM Radio Stations around the World go in here. Although a lot of radio stations exist worldwide, only those belonging to the western/eastern civilizations are considered in here as the DJ set phenomenon is not necessarily widespread in countries such as India or Indonesia. Apart from that, the radio listings do not show that many radios from Japan, Korea and China (chinese, japanese and korean members of TMB - please add your radios!).

Basic Radio Listing Considerations

  • For TheMixingBowl of interest are only the stations offering DJ sets that you can't buy anywhere as that it is what TheMixingBowl is all about. Only radio stations meeting this requirement are listed here.
  • Not all radio stations broadcasting DJ sets are suitable for TheMixingBowl.org as they do not meet the minimum quality requirements to allow their sets being uploaded to TheMixingBowl. This applies mainly to Internet-based radio stations as most of them are broadcasting nuked sets of low quality (sets that would be available elsewhere in much higher quality). A whitelist for high-quality internet-based stations broadcasting original DJ-sets will be provided below.
  • Special care needs to be taken for radio stations broadcasting digital signals as the bitrate might be very low. Minimum acceptable bitrates for digital broadcasts need to be taken into account.


Radio Quality Assessment

Many radio stations are broadcasting in different formats and not only in one. We assume that all radio stations are broadcasting in stereo in the following.

  • Analogue radio broadcasts (FM frequencies, cable, satellite) [RAW - format]
  • Digital radio broadcasts (DAB, Freeview, DVB-S, DVB-T, DVB-C) [ MP2 -format]
  • Digital internet broadcasts (stream, podcast) [ MP3, AAC+, WMA, RA, OGG -formats]

One can now safely deduce a quality order among all the different formats. Topmost given is the format with the highest quality, the entry at the bottom of the listing is a strict No-No if you have a choice.

  • Digital broadcasts with complete transparency (exceptionally high bitrates).
  • Analogue broadcasts without noise and digital broadcasts with near-transparency.
  • Noisy analogue broadcasts and digital broadcasts at medium bitrates.
  • Digital broadcasts at low bitrates.

Okay, we do not need to discuss the quality of analogue broadcasts as everyone can easily distinguish a noisy broadcast from an excellent quality broadcast but when is a digital broadcast transparent or near-tranparent? One has to know, that all digital formats used to broadcast music are lossy and do not contain all the original audio information. Lossless digital broadcasts do not exist up to now. The quality of a digital broadcast is determined by two values both together, the bitrate and the frequency. Transparency means that the human ear cannot distinguish the broadcasted signal from the original high quality music set.

  • Frequency (almost independent from the format):
    • >40 kHz: transparent (such as the "CD-quality" of 44.1 kHz).
    • 32-40 kHz: near-transparent.
    • <32 kHz: one can hear the lower frequencies only, the high frequencies are cut off.
  • Bitrate (for the formats MP2, MP3, WMA, RA valid as a rule of thumb):
    • >192kbps: transparent
    • 160-192kbps: near-transparent
    • 112-160kbps: medium bitrates, one can easily hear differences to the original
    • <112kbps: low bitrates, usually with lots of "crispy" distortions at higher frequencies
  • Bitrate (for the more advanced formats AAC+ and OGG):
    • >160kbps: transparent
    • 96-160kbps: near-transparent
    • 64-96kbps: medium bitrates, higher frequencies are removed, sounds "smooth".
    • <64kbps: low bitrates, suitable for speech or mono transmissions only.

By looking at all available radio stations one will easily find out that a broadcast of transparent audio data does not exist. Most are not even near-transparent. It is therefore recommended to listen to analogue broadcasts, where possible, especially when transmitted by cable or satellite. The same applies for recordings of audio broadcasts that are going to be uploaded to TheMixingBowl


-V(number) where number is 0-9, 0 being highest quality, 9 being the lowest.

List of recommended settings
Switch Preset Target Kbit/s Bitrate range kbit/s
-b 320 --preset insane 320 320 CBR
-V 0 --vbr-new --preset fast extreme 245 220...260
-V 0 --preset extreme 245 220...260
-V 1 --vbr-new 225 200...250
-V 1 225 200...250
-V 2 --vbr-new --preset fast standard 190 170...210
-V 2 --preset standard 190 170...210
-V 3 --vbr-new 175 155...195
-V 3 175 155...195
-V 4 --vbr-new --preset fast medium 165 145...185
-V 4 --preset medium 165 145...185
-V 5 --vbr-new 130 110...150
-V 5 130 110...150
-V 6 --vbr-new 115 95...135
-V 6 115 95...135
-V 7 --vbr-new 100 80...120
-V 7 100 80...120
-V 8 --vbr-new 85 65...105
-V 8 85 65...105
-V 9 --vbr-new 65 45...85
-V 9 65 45...85