Difference between revisions of "MP3"
From TMB Wiki
m |
m |
||
| Line 15: | Line 15: | ||
*3.97 beta 3 is the LAME version you need ([http://www.rarewares.org/mp3.html download the LAME 3.97 beta 3 bundle from this page]) | *3.97 beta 3 is the LAME version you need ([http://www.rarewares.org/mp3.html download the LAME 3.97 beta 3 bundle from this page]) | ||
| − | *The input file for lame is most often a WAV file (CD tracks or recorded broadcasts with the *.wav extension). The general syntax (command line) for getting a suitable mp3-file is quite simple: "lame.exe | + | *The input file for lame is most often a WAV file (CD tracks or recorded broadcasts with the *.wav extension). The general syntax (command line) for getting a suitable mp3-file is quite simple: "lame.exe '''switch''' input.wav". Switches can define a lot of things but you will most probably only need to define a bitrate. |
*Create preferably variable bitrate files (VBR) with a targeted average bitrate between 170-210kbps, if possible. Do this by trying the '''-V 2 --vbr-new''' switch first (fully sufficient for tracks from CD), then '''-V 1 --vbr-new''' and finally the '''-V 0 --vbr-new''' switch (the alternative switches might be necessary for WAV files recorded from FM broadcasts), whatever of them gives results in the desired bitrate range. | *Create preferably variable bitrate files (VBR) with a targeted average bitrate between 170-210kbps, if possible. Do this by trying the '''-V 2 --vbr-new''' switch first (fully sufficient for tracks from CD), then '''-V 1 --vbr-new''' and finally the '''-V 0 --vbr-new''' switch (the alternative switches might be necessary for WAV files recorded from FM broadcasts), whatever of them gives results in the desired bitrate range. | ||
| − | *Instead of encoding at a variable bitrate you can also encode your input file at a constant bitrate (CBR) although this is not recommended. Most | + | *Instead of encoding at a variable bitrate you can also encode your input file at a constant bitrate (CBR) although this is not recommended. Most mp3-files on the TMB tracker are constant bitrate files at 192kbps, though. Use the '''-b 192''' switch to get these mp3-files. |
| − | For a more complete guide please read the [[LAME]] page on the wiki. | + | For a more complete guide for preparing VBR mp3-files please read the [[LAME]] page on the wiki. |
==CD Ripping== | ==CD Ripping== | ||
Revision as of 22:23, 30 August 2006
MP3 is short for MPEG-1 Audio Layer 3 and it is the preferred audio format at The Mixing Bowl due to its compatibility and high quality when used at high bitrates.
LAME
LAME is the recommeded MP3 encoder at The Mixing Bowl. Some benefits of using LAME:
- Highly optimised presets
- CBR, ABR and VBR encoding methods
- Gapless playback with LAME-header compliant decoders
- Exact Audio Copy and CDex support
MP3 creation with the LAME encoder
To save yourself reading and researching a lot of information, here is a very quick guide to using LAME:
- 3.97 beta 3 is the LAME version you need (download the LAME 3.97 beta 3 bundle from this page)
- The input file for lame is most often a WAV file (CD tracks or recorded broadcasts with the *.wav extension). The general syntax (command line) for getting a suitable mp3-file is quite simple: "lame.exe switch input.wav". Switches can define a lot of things but you will most probably only need to define a bitrate.
- Create preferably variable bitrate files (VBR) with a targeted average bitrate between 170-210kbps, if possible. Do this by trying the -V 2 --vbr-new switch first (fully sufficient for tracks from CD), then -V 1 --vbr-new and finally the -V 0 --vbr-new switch (the alternative switches might be necessary for WAV files recorded from FM broadcasts), whatever of them gives results in the desired bitrate range.
- Instead of encoding at a variable bitrate you can also encode your input file at a constant bitrate (CBR) although this is not recommended. Most mp3-files on the TMB tracker are constant bitrate files at 192kbps, though. Use the -b 192 switch to get these mp3-files.
For a more complete guide for preparing VBR mp3-files please read the LAME page on the wiki.
CD Ripping
The best way to rip CDs to MP3 is with EAC. The following three EAC guides are very good:
Further Reading
Hydrogenaudio are widely regarded as the digital audiophile site on the web. Most of the audio codec developers are members of the forum, and the information detailed there in stickies and posts, in our opinion, is the best available anywhere on the internet.
Hydrogenaudio have officially announced a successor to their previoulsy recommended LAME mp3 encoder version 3.90.3. The recommended version is now 3.97 beta 3.
