Difference between revisions of "Get iplayer"

From TMB Wiki
Jump to: navigation, search
(Guide To Capturing & Preparing Radio Shows)
(Steps)
Line 15: Line 15:
  
 
# Run get_iplayer and use the appropriate commands to capture the content you want:
 
# Run get_iplayer and use the appropriate commands to capture the content you want:
** '''Live Streams''' (these are broadcasts/transmissions that are going out live across the BBC station)
+
* '''Live iPlayer Streams''' (these are broadcasts/transmissions that are going out live across the BBC station)
*** <big><code>get_iplayer --type=liveradio --pid=bbc_radio_one --start=00:00:05 --stop=00:00:35 --force </code></big> - captures 30 seconds of the live transmission from BBC Radio 1
+
** <big><code>get_iplayer --type=liveradio --pid=bbc_radio_one --start=00:00:05 --stop=00:00:35 --force </code></big>
**** the <big><code>--start</big></code> and <big><code>--stop</big></code> parameters are hh:mm:ss. This enables you to schedule a recording without having to do it live.
+
*** the above command captures 30 seconds of the live transmission from the BBC Radio 1 station 5 seconds after get_iplayer has been sent the command. 
 +
*** the <big><code>--start</code></big> and <big><code>--stop</code></big> parameters are hh:mm:ss. This enables you to schedule a recording without having to do it live. And using a Windows scheduler allows you to set up weekly repeats.
 +
* '''Listen Again iPlayer Stream'''
 +
** <big><code>get_iplayer --type=radio --pid=b006wkfp</code></big>
 +
*** the above command captures the audio that relates to the pid as defined above.
 +
# You will most likely need to edit the audio to remove unwanted parts from the start and end. You can [[lossless]]ly do this with [[MP3DirectCut]]. However, [[MP3DirectCut]] only works on [[AAC]] files and so you will need to unpackage the [[M4A]] file using [[MP4Box]] to extract the raw [[AAC]] file.
  
 
==Download==
 
==Download==

Revision as of 18:28, 3 September 2015

get_iplayer is a free and Open Source program released under the GNU GPL that allows you to access content from the BBC iPlayer. It is primarily used to capture video (TV) and audio (Radio) broadcasts. You are able to capture these media files from both the archived watch/listen again iPlayer as well as live streams. The media files captured are the actual source files transmitted by the iPlayer and so the quality is excellent.

Capturing & Preparing Radio Shows

Windows

Required Programs

Steps

  1. Run get_iplayer and use the appropriate commands to capture the content you want:
  • Live iPlayer Streams (these are broadcasts/transmissions that are going out live across the BBC station)
    • get_iplayer --type=liveradio --pid=bbc_radio_one --start=00:00:05 --stop=00:00:35 --force
      • the above command captures 30 seconds of the live transmission from the BBC Radio 1 station 5 seconds after get_iplayer has been sent the command.
      • the --start and --stop parameters are hh:mm:ss. This enables you to schedule a recording without having to do it live. And using a Windows scheduler allows you to set up weekly repeats.
  • Listen Again iPlayer Stream
    • get_iplayer --type=radio --pid=b006wkfp
      • the above command captures the audio that relates to the pid as defined above.
  1. You will most likely need to edit the audio to remove unwanted parts from the start and end. You can losslessly do this with MP3DirectCut. However, MP3DirectCut only works on AAC files and so you will need to unpackage the M4A file using MP4Box to extract the raw AAC file.

Download